|
||
|
Large Optics Fabrication and Testing Group |
Official Documents | Other Documents
Papers, dissertations and presentations
2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1995 | 1994 | 1993
|
Absolute Measurements of Large Mirrors |
|
|
|
Alignment analysis of four-mirror spherical aberration correctors |
|
|
|
Aberration fields of a combination of plane symmetric systems |
|
|
|
Calibration limits for interferometric measurements |
|
|
|
Orthonormal vector polynomials in a unit circle, Part II: completing the basis set |
|
|
Orthonormal vector polynomials in a unit circle, Part I: basis set derived from gradients of Zernike polynomials |
|
|
|
Computer Generated Hologram |
|
|
|
Advanced Technologies for Fabrication and Testing |
|
|
|
Measurement of a 2-meter Flat Using a Scanning Pentaprism System |
|
|
|
Structure function analysis of mirror fabrication and support errors |
||
|
Use of a commercial laser tracker for optical alignment |
||
|
Optical alignment with computer generated holograms |
||
|
Fabrication and testing of large flats |
||
|
Shear test of the off-axis surface with an axis-symmetric parent |
Presentation |
|
|
Absolute calibration of null correctors using dual-computer-generated holograms (CGHs) |
Mallik AOMATT SPIE |
|
|
An Easy Way to Relate Optical Element Motion to System Pointing Stability |
||
|
Absolute Calibration of Null Correctors Using Twin Computer-generated Holograms |
|
|
|
Design and Analysis for Interferometric Measurements of the GMT Primary Mirror Segments |
|
|
|
A Lunar Liquid Mirror Telescope (LLMT) for Deep-Field Infrared Observations Near the Lunar Pole |
|
|
|
Telescope to Observe Planetary Systems (TOPS): a High Throughput 1.2-m Visible Telescope with a Small Inner Working Angle |
|
|
|
Manufacture of a 1.7 m Prototype of the GMT Primary Mirror Segments |
|
|
|
Design and Manufacture of 8.4 m Primary Mirror Segments and Supports for the GMT |
|
|
|
Maximum Likelihood Estimation as a General Method of Combining Sub-Aperture Data for Interferometric Testing |
|
|
|
Use of Computer Generated Holograms for Alignment of Complex Null Correctors |
|
|
|
Figure Measurement of a Large Optical Flat with a Fizeau Interferometer and Stitching Technique |
|
|
|
Alternate Surface Measurements for GMT Primary Mirror Segments |
|
|
Measurement of a 2-meter Flat Using a Scanning Pentaprism System |
|
|
|
Measurement of Large Convex Aspheres |
|
|
|
Rapid Fabrication Strategies for Primary and Secondary Mirrors at Steward Observatory Mirror Laboratory |
|
|
|
Detection and Spectroscopy of Exo-Planets Like Earth |
|
|
|
Testable Lightweight Telescopes for Space |
|
|
|
Processing Parameters Optimization for Thermochemical Writing of DOEs on Chromium Films |
|
|
|
Fabrication of the 6.5m Primary Mirror for the Multiple Mirror Telescope Conversion |
|
|
|
Measuring the Radius of Curvature of a Spherical Mirror with an Interferometer and a Laser Tracker |
|
|
|
Effects of Birefringence on Fizeau Interferometry that Uses Polarization Phase Shifting Technique |
|
|
|
Testing an Off-axis Parabola with a CGH and a Spherical Mirror as a Null Lens |
|
|
|
Fizeau Interferometry for Large Convex Surfaces |
|
|
Design and Control of Lightweight, Active Space Mirrors |
|
|
|
Application of Computed Tomography for Measuring Three Dimensional Refractive Index Inhomogeneity |
|
|
|
Demonstration of Accuracy and Flexibility of Using CGH Test Plates for Measuring Aspheric Surfaces |
|
|
|
Applications of Computer-Generated Holograms for Interferometric Measurement of Large Aspheric Optics |
|
|
|
Optimized Active, Lightweight Space Mirrors |
|
|
|
Vibration Stabilization of a Phase Shifting Interferometer for Large Optics |
|
|
|
Fabrication of Cube Beamsplitters for While Light Interferometry |
|
|
|
Manufacture of 8.4 m Off-axis Segments: a 1/5 Scale Demonstrations |
|
|
|
Fabrication of Large Secondary Mirrors for Astronomical Telescopes |
|
|
|
Metrology Results and Lessons Learned from the Univ. of Arizona NGST Mirror System Demonstrator |
|
|
Analysis for Alignment of Optical Systems |
|
|
|
Optical Design for Extremely Large Telescope Adaptive Optics Systems |
|
|
|
Optical Shop Applications for Laser Tracker Metrology Systems |
|
|
|
Optical Issues for Giant Telescopes with Extremely Fast Primary Mirrors |
|
|
|
20 and 30 m Telescope Designs with Potential for Subsequent Incorporation Into a Track-Mounted Pair (20/20 or 30/30) |
|
|
|
Fabrication of Mirrors for the Magellan Telescope and the Large Binocular Telescope |
|
|
|
Optics for the 20/20 Telescope |
|
|
|
Final Laboratory Results of Visible Nulling with Dielectric Plates |
|
|
|
Three Dimensional Bulk Index Inhomogeneity Measurement Using Computed Tomography |
|
|
|
A 30 Meter Cassegrain Telescope with Spherical Optics and a 3° Field |
|
|
The Criteria for the Correction of Quadratic Field- Dependent Aberrations |
|
|
|
Fundamentals of the Design of Multiple Aperture Telescopes with Wide Fields of View |
|
|
|
Measurement of a Test Plate Using a Test Plate and Computer Generated Holograms |
|
|
|
Novel Tooling for Production of Aspheric Surfaces |
|
|
|
Stretched Membrane with Electrostatic Curvature (SMEC) Mirrors: A New Technology for Large Lightweight Space Telescopes |
|
|
|
Measurement of Highly Parabolic Mirror Using Computer Generated Hologram |
|
|
|
Basic Principles in the Optical Design of Imaging Multiple Aperture Systems |
|
|
|
Imaging Interferometers Using Flat Primary Segments |
|
|
|
Index Inhomogeneity Effects on Imaging Systems |
|
|
|
Criteria for Correction of a All Aberrations with a Quadratic Field Dependence |
|
|
|
Aspheric Optics: Smoothing the Ripples with Semi-Flexible Tools |
|
|
|
Optical test alignment using computer generated holograms |
|
|
Achromatic Nulling Beam Combiner for the Detection of Extrasolar Planets |
|
|
|
Development of Optimal Grinding and Polishing Tools for Aspheric Surfaces |
|
|
|
Ultralightweight Active Mirror Technology at the University of Arizona |
|
|
|
Demonstration of a 0.5-m Ultralightweight Mirror for Use at Geosynchronous Orbit |
|
|
|
Polar Coordinate Laser Writing Systems: Error Analysis of Fabricated DOEs |
|
|
|
Stretched Membrane with Electrostatic Curvature (SMEC) Mirrors for Extremely Large Space Telescopes |
|
|
|
Suitability of Igneous Rock for Precision Tooling |
|
|
|
NGST Mirror System Demonstrator from the University of Arizona |
|
|
Optical Design of Giant Telescopes for Space |
|
|
|
Radius of Curvature Metrology for Segmented Mirrors |
|
|
|
Stretched Membrane with Electrostatic Curvature (SMEC): A New Technology for Ultra-lightweight Space Telescopes |
|
|
|
UltraLITE Glass/Composite Hybrid Mirror |
|
|
|
NGST OTA Optical Metrology Instrumentation and Conceptual Approaches |
|
|
|
Optical Fabrication of the MMT Adaptive Secondary Mirror |
|
|
|
Cryogenic Beam-Combiner for Very Low Background, 2-20 Micron Interferometry on the 22.8 Large Binocular Telescope |
|
|
|
Nulling Interferometric Beam Combiner Utilizing Dielectric Plates: Experimental Results in the Visible Broadband |
|
|
|
Flat Membrane Mirrors for Space Telescopes |
|
|
|
Active Mirror Technology for Large Space Telescopes |
|
|
Diffraction Wavefront Analysis of Computer-Generated Holograms |
|
|
|
Efficient Testing of Off-Axis Aspheres with Test Plates and Computer-Generated Holograms |
|
|
|
Manufacture of a 2-m Mirror with Glass Membrane Facesheet and Active Rigid Support |
|
|
|
Error Analysis for CGH Optical Testing |
|
|
|
Polishing of a 6.5 m F/1.25 Mirror for the First Magellan Telescope |
|
|
|
Progress Report on the Optical System for Closed-loop Testing of the Multiple Mirror Telescope Adaptive Secondary Mirror |
|
|
|
Optical Design of ARIES: the New Near Infrared Science Instrument for the Adaptive F/15 Multiple Mirror Telescope |
|
|
|
Design, Tolerancing, and Certification of a Null Corrector to Test 8.4 Meter Mirrors |
|
|
|
Certification of a Null Corrector via a Diamond Turned Asphere: Design and Implementation |
|
|
|
Vibration-compensated Interferometer for Measuring Cryogenic Mirrors |
|
|
|
Ultra-lightweight, Actively Controlled Mirrors for Space |
|
|
Lightweight Mirror Technology Using a Thin Facesheet with Active Rigid Support |
|
|
|
Toward NGST |
|
|
|
Fabrication and Measured Quality of the MMT Primary Mirror |
|
|
|
ARIES: Arizona Infrared Imager and Echelle Spectrograph |
|
|
|
Planet Discoverer Interferometer I: PDI, a Potential Precursor to the Terrestrial Planet Finder |
|
|
|
Optical System for Closed-Loop Testing of Adaptive Optic Convex Mirror |
|
|
Fizeau Interferometry for Large Convex Surfaces |
|
|
Fabrication and Testing of the 3.5m, f/1.75 WIYN Primary Mirror |
|
|
|
Full-Aperture Interferometric Test of Convex Secondary Mirrors Using Holographic Test Plates |
|
|
|
Measurement of a Convex Secondary Mirror Using a Holographic Test Plate |
|
|
|
Null Test Optics for the MMT and Magellan 6.5-m f/1.25 Primary Mirrors |
|
|
|
Certification of Null Correctors for Primary Mirrors |
|
|
Advanced Techniques for Measuring Primary Mirrors for Astronomical Telescopes |
|
|
|
A Null Test for Null Correctors: Error Analysis |
|