|
||
|
Large Optics Fabrication and Testing Group |
Jim Burge Publications
2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1987
|
|
J. H. Burge, “Mirror Technologies for Giant Telescopes,” presented at the
|
|
|
J. H. Burge, “Fabrication and Testing of Large Free-Form Surfaces,” presented at OSA Annual meeting in |
|
|
|
|
|
J. H. Burge and R. E. Parks, “Optomechanical engineering education at University of Arizona,” in Advances in Optomechanics, A. Hatheway, ed, Proc. SPIE 7424 (2009). |
|
|
J. H. Burge, S. Benjamin, D. Caywood, C. Noble, M. Novak, C. Oh, R. Parks, B. Smith, P. Su, M. Valente, C. Zhao, “Fabrication and testing of 1.4-m convex off axis aspheric optical surfaces,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
M. B. Dubin, C. Zhao, J. H. Burge, “Fizeau interferometer with spherical reference and CGH correction for measuring of large convex aspheres,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
D. W. Kim, W. H. Park, S.W. Kim, J. H. Burge, “Parametric modeling of edge tool infl uence functions for computer controlled optical surfacing,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
T. L. Zobrist, J. H. Burge, H. M. Martin, “Laser tracker surface measurements of the 8.4m GMT primary mirror segment,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
P. Zhou and J. H. Burge, “Limits for interferometer calibration using random ball test,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
C. Zhao and J. H. Burge, “Orthonormal vector polynomials in a unit circle -application: fi tting mapping distortions in a null test,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
P. Su, J. H. Burge, B. Cuerden, H. M. Martin, “Scanning pentaprism measurements as a verification test for off-axis aspherics,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
|
A. M. Manuel, J. H. Burge, “Alignment aberrations of the New Solar Telescope,” in Optical System Alignment, Tolerancing, and Verification III, ed. by J. Sasian and R. N. Youngworth, Proc. SPIE 7433, (2009). |
|
|
P. Su, J. H. Burge, R. E. Parks, C. J. Oh, “Swing-arm optical CMM for aspherics,” in Optical Manufacturing and Testing VIII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 7426, (2009). |
|
J. H. Burge, P. Su, T. Zobrist, C. Zhao, “Use of a commercial laser tracker for optical alignment”
in Optical System Alignment and Tolerancing, ed. by J.
Sasian and M. Ruda, Proc. SPIE 6676, (2007). |
|
|
J. H. Burge, R. Zehnder, C. Zhao,“Optical alignment with computer-generated holograms,” in Optical System Alignment and Tolerancing, ed. by J. Sasian and M. Ruda, Proc. SPIE 6676, (2007). |
|
|
|
P. Zhou and J. H. Burge, “Optimal design of computer-generated holograms to minimize sensitivity to fabrication errors,” Opt. Express 15, 15410-15417 (2007). |
|
|
C. Zhao and J. H. Burge,
“Orthonormal vector polynomials in a unit circle, Part I: basis set derived
from gradients of Zernike polynomials,” Opt. Express 15, 18014-18024 (2007). |
|
|
J. Yellowhair and J. H.
Burge, "Analysis of a scanning pentaprism system for measurements of
large flat mirrors," Appl. Opt. 46, 8466-8474 (2007). |
|
P. C. V. Mallik, C. Zhao, J. H. Burge, “Measurement of a 2-meter flat using a pentaprism scanning system,” Optical Engineering 46 (2), 023602 (2007). |
|
|
|
P. Zhou and J. Burge, “Coupling of surface roughness to the performance of computer-generated holograms,” Appl. Opt. 46, 6572-6576 (2007). |
|
|
P. Zhou and J. H. Burge, “Fabrication error analysis and experimental demonstration for computer-generated holograms,” Appl. Opt. 46, 657-663 (2007). |
|
|
C. Zhao and J. H. Burge, “Imaging aberrations from null
correctors,” in Advanced
Optical Manufacturing and Testing Technologies 2007,
Proc. SPIE 6723 67230L (2007). |
|
P. C. V Mallik, “Absolute calibration of null
correctors using dual computer-generated hologram,” in Advanced Optical Manufacturing and
Testing Technologies 2007, Proc.
SPIE 6721, 672104 (2007). |
|
|
J. Yellowhair, P. Su, M.
Novak, J. Burge, “Fabrication and testing of large flats,” in Optical Manufacturing and Testing VII, ed. by J. Burge, O. Faehnle, and R. Williamson,
Proc. SPIE 6671, (2007). |
|
|
S. Hvisc and J. H. Burge, “Structure
function analysis of mirror fabrication and support,” in Optical Manufacturing and Testing VII, ed. by J. Burge, O. Faehnle, and R. Williamson,
Proc. SPIE 6671, (2007) |
|
|
|
P. Su, J. Sasian, and J. H. Burge, “Shear test of off-axis surface with axi-symmetric parent,” in Optical Manufacturing and Testing VII, ed. by J. Burge, O. Faehnle, and R. Williamson, Proc. SPIE 6671, (2007). |
2006
|
|
E. E. Sabatke, J. H. Burge, and P. Hinz, “Optical design of interferometric telescopes with wide fields of view,” Appl. Opt. 45, 8026-8035 (2006). |
|
|
Y. Chang, P. Zhou, J. H. Burge, “Analysis of phase sensitivity for binary computer generated holograms,” Appl. Opt. 45, 4223-4234 (2006). |
|
J. H. Burge, “An easy way to relate optical element motion to system pointing stability,” in Current Developments in Lens Design and Optical Engineering VII, edited by P. Mouroulis, W. J. Smith, R. B. Johnson, Proc. SPIE 6288, 62880I (2006). |
|
|
J. H. Burge, L. B. Kot, H. M. Martin, C. Zhao and R. Zehnder, “Design and analysis for interferometric testing of the GMT primary mirror segments”, in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
|
J. H. Burge, T. Zobrist, L. B. Kot, H. M. Martin and C. Zhao, “Alternate surface measurements for GMT primary mirror segments”, in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
C. Zhao, RA Sprowl, M Bray, JH Burge, “Figure measurement of a large optical flat with a Fizeau interferometer and stitching technique,” in Interferometry XIII, edited by E. Novak, W. Osten, C. Gorecki, Proc. of SPIE 6293, 62930K, (2006). |
|
P. C. V.
Mallik, R. Zehnder, J. H. Burge, and A. Poleshchuk, “Absolute calibration of
null correctors using twin computer-generated holograms,” in Interferometry XIII: Techniques and
Analysis, edited by K. Creath, J. Schmit, Proc. SPIE 6292, 62920H (2006). |
|
|
H. M. Martin, J. H. Burge, S. D. Miller, B. K. Smith, R. Zehnder and C. Zhao, “Manufacture of a 1.7-m prototype of the GMT primary mirror segments”, in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
|
H. M. Martin, J. R. P. Angel, J. H. Burge, B. Cuerden, W. B. Davison, M. Johns, J. S. Kingsley, L. B. Kot, R. D. Lutz, S. M. Miller, S. A. Shectman, P. A. Strittmatter and C. Zhao, “Design and manufacture of 8.4 m primary mirror segments and supports for the GMT”, in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
R. Zehnder, J. H. Burge and C. Zhao, “Use of computer-generated holograms for alignment of complex null correctors”, in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
M. Lloyd-Hart, J. R. P. Angel, M. W. Johns, J. H. Burge, N. M. Milton, K. B. Powell, S. Hvisc, B. Cuerden, M. J. Rademacher, “Design of the adaptive optics systems for GMT,” in Advances in Adaptive Optics II, ed. B. L. Ellerbroek, D. Bonaccini, Proc. SPIE 6272 (2006). |
|
|
V. L. Krabbendam, J. H. Burge, C. F. Claver, B. Cuerden, W. B. Davison, W. J. Gressler,J. S. Kingsley, H. M. Martin, D. R. Neill, M. H. Rascon, J. Sebag, “LSST primary/tertiary monolithic mirror design,” in Optomechanical Technologies for Astronomy, ed. E. Atad-Ettedgui, J. Antebi and D. Lemke, Proc. SPIE 6273 (2006). |
|
|
M. Liang, L. G. Seppala, D. W. Sweeney, C. F. Claver, V. L. Krabbendam, J. Sebag, J. H. Burge, “LSST optical design sensitivity analysis,” in Modeling, Systems Engineering, and Project Management for Astronomy II, ed. M. J. Cullum and G. Z. Angeli, Proc. SPIE 6271 (2006). |
|
|
S. P. Worden, J. R. P. Angel, D. J. Eisenstein, S. Sivanandam, J. H. Burge, E. F. Borra, C. M. Gosselin, O. Seddiki, S. Thibault, P. Hickson, K. B. Ma, B. Foing, J. L. Josset,“A lunar liquid mirror telescope (LLMT) for deep-field infrared observations near the lunar pole,” in Space Telescopes and Instrumentation I: Optical, Infrared, and Millimeter, ed J. C. Mather, H. A. MacEwen, M. W. de Graauw, Proc. SPIE 6265 (2006) |
|
|
O. Guyon, J.R.P. Angel, C. Bowers, J.H.Burge, A. Burrows, J. Codona, T. Greene, M. Iye, J. Kasting, H. Martin, D.W. McCarthy,Jr., V. Meadows, M. Meyer, E.A. Pluzhnika, N. Sleeph, T. Spears, M. Tamura, D. Tenerelli, R. Vanderbeik, B. Woodgate, R.Woodruff, N.J.Woolf, “Telescope to Observe Planetary Systems (TOPS):a high throughput 1.2-m visible telescope with a small inner working angle,” in Space Telescopes and Instrumentation I: Optical, Infrared, and Millimeter, ed J. C. Mather, H. A. MacEwen, M. W. de Graauw, Proc. SPIE 6265 (2006) |
|
|
P. Su, J.H. Burge, R. Sprowl, J. Sasian, “Maximum Likelihood Estimation as a General Method of Combining Sub-Aperture Data for Interferometric Testing,” in International Optical Design Conference 2006, Proc. SPIE 6342 (2006). |
|
J. H. Burge, L. B. Kot, H. M. Martin, R. Zehnder, C. Zhao, “Optical metrology for the 8.4 m diameter mirror segments for the 25m Giant Magellan Telescope,“ |
|
C. Zhao, D. Kang, and J. Burge, “Effects of birefringence on Fizeau interferometry that uses a polarization phase-shifting technique,” Appl. Opt. 44, 7548-7553 (2005). |
|
|
|
C. Zhao, R. Zehnder, J. H. Burge, “Measuring the radius of curvature of a spherical mirror with an interferometer and a laser tracker,” Optical Engineering 44(9) 090506 (2005). |
|
|
E. Sabatke, J. Burge, and D. Sabatke, “Analytic diffraction analysis of a 32-m telescope with hexagonal segments for high-contrast imaging,” Appl. Opt. 44, 1360-1365, (2005). |
|
|
Y. Chang, P. Zhou, J. H. Burge, “Analysis of phase sensitivity for binary computer generated holograms,” accepted for publication, Applied Optics (2005). |
|
C. Zhao, R. Zehnder, J. H. Burge, H. M. Martin, “Testing an off-axis parabola with a CGH and a spherical mirror as null lens,” in Optical Manufacturing and Testing VI, H. P. Stahl, Ed., Proc. SPIE 5869, 58690X (2005) |
|
|
|
P. C. V. Mallik, C. Zhao, and J. H. Burge,” Measurement of a 2-meter flat using a pentaprism scanning system,” in Optical Manufacturing and Testing VI, H. P. Stahl, Ed., Proc. SPIE 5869, 58691A (2005) |
|
|
C. Zhao, D. Kang, and J. H. Burge , “Effects of birefringence on Fizeau interferometry that uses polarization phase shifting technique,” in Optical Manufacturing and Testing VI, H. P. Stahl, Ed., Proc. SPIE 5869, 586911 (2005). |
|
|
R. Angel, J. Burge, and S. P. Worden, “Testable lightweight telescopes for space,” in UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts II, edited by H. A. MacEwen, Proc.SPIE 5899, 58990X (2005). |
|
|
V. L. Krabbendam, J.H. Burge, C. Claver, B. Cuerden, W. Davison, W. J. Gressler, J. Kingsley, H. Martin, D. R. Neill, S. Olivier, D. Phillion, J. Sebag, D. Sweeney, “LSST Telescope Design Developments,” American Astronomical Society Meeting 207, #26.22 (2005). |
|
|
E. Sabatke and J. H. Burge, "
Single-Arm Design Method for Multiple Aperture Imaging
Telescopes," in Frontiers in Optics, OSA Technical Digest Series
(Optical Society of |
|
|
D. W. Kim, J. H. Burge, and S. -W. Kim, " Optimization of Bulged Precessing Tool Polishing for Efficient Mass-Fabrication of Large Optical Surfaces," in Frontiers in Optics, OSA Technical Digest Series (Optical Society of America, 2005). |
|
F. Y. Pan, J. Burge, “Efficient Testing of Segmented Aspherical Mirrors by Use of Reference Plate and Computer-Generated Holograms. I. Theory and System Optimization,” Appl. Opt., 43, 5303-5312, (2004). |
|
|
|
F. Y. Pan, J. Burge, D. Anderson, A. Poleshchuk, “Efficient Testing of Segmented Aspherical Mirrors by Use of a Reference Plate and Computer-Generated Holograms. II. Case Study, Error Analysis, and Experimental Validation,” Appl. Opt. 43, 5313-5322 (2004) |
|
|
F. Y. Pan, J. H. Burge, R. Zehnder, and Y. Wang, “Fabrication and alignment issues for segmented mirror telescopes,” Appl. Opt. 43, 2632-2642 (2004). |
|
|
T. Kim, J. H. Burge, Y. Lee, S. Kim, “Null test for a highly paraboloidal mirror,” Appl. Opt., 43, 3614-3618, (2004). |
|
|
B. L. Stamper, J. H. Burge, and W. J. Dallas, “Three-dimensional bulk index inhomogeneity measurement using computed tomography,” in Optical Manufacturing and Testing V, H. P. Stahl, Ed., Proc. SPIE 5180, 413-420 (2004) |
|
|
H. M. Martin,; J. H. Burge,B. Cuerden, S. Miller, B. Smith, “Manufacture of 8.4-m off-axis segments: a 1:5 scale demonstration,” in Optical Fabrication, Metrology, and Material Advancements for Telescopes, E. Atad-Ettedgui, P. Dierickx, Eds., Proc. SPIE 5494 62-70 (2004). |
|
|
G. G. Williams, E. W. Olszewski, M. P. Lesser, and J. H. Burge, “90prime: a prime focus imager for the Steward Observatory 90-in. telescope,” in Ground-based Instrumentation for Astronomy, edited by A. Moorwood and M. Iye, Proc.SPIE 5492, 787-798 (2004) |
|
|
V. Krabbendam,C. Claver, L. Daggert, J. Sebag, D. Neill, R. Gomez,J. H. Burge, R. Tessieries, W. Davison, B. Cuerden, “LSST Telescope Design,” Proc. AAS 205, #108.04 (2004). |
|
|
P. D. Koudelka, J. H Burge, “Fabrication of cube beamsplitters for white light interferometry,” in Optical Fabrication, Testing, and Metrology, R. Geyl, D. Rimmer, and L Wang, Eds., Proc. SPIE 5252, 17-25 (2004). |
|
|
D. Baiocchi, J. H. Burge, B. Cuerden, “Metrology results and lessons
learned from the
|
|
|
B. L. Stamper, J. H. Burge, W. J. Dallas, “Measurement of bulk refractive index inhomogeneity,” in Optical Manufacturing and Testing V, H. Stahl, ed. Proc. SPIE 5180, (2004) |
|
J. H. Burge and J. R. P Angel, “Wide field telescope using spherical mirrors,” in Novel Optical Systems Design and Optimization VI, J. Sasian, ed., Proc. SPIE 5174, 83-92 (2004). |
|
|
|
D. Baiocchi and J. H. Burge, “Optimized active, lightweight space mirrors,” in UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts,H. A. MacEwen, Ed. Proc. SPIE 5166, 49-57 (2004). |
|
|
D. Baiocchi and J. H. Burge, “Lightweight space mirror technology at the University of Arizona,” in Space Telescopes and Instruments, J. Mather, ed., Proc. SPIE 4850 (2003). |
|
|
J. R. P. Angel, J. H. Burge, J. L. Codona, W. B. Davison, and B. Martin , “20 and 30 m telescope designs with potential for subsequent incorporation into a track-mounted pair,” in Future Giant Telescopes, J. R. P Angel and R. Gilmozzi, eds., Proc. SPIE 4840, 183-193 (2003). |
|
|
J. H. Burge and J. R. P Angel, “A 30 meter Cassegrain telescope with spherical optics and 3° field,” in Future Giant Telescopes, J. R. P Angel and R. Gilmozzi, eds., Proc. SPIE 4840 (2003). |
|
J. H. Burge and H. M. Martin, “Optical issues for giant telescopes with extremely fast primary mirrors,” in Future Giant Telescopes, J. R. P Angel and R. Gilmozzi, eds., Proc. SPIE 4840 (2003). |
|
|
|
H. M. Martin, J. R. P Angel, J. H. Burge, S. M. Miller, J. M. Sasian, P. A. Strittmatter, “Optics for the 20/20 telescope,” in Future Giant Telescopes, J. R. P Angel and R. Gilmozzi, eds., Proc. SPIE 4840 (2003). |
|
|
R. M. Morgan, J. H. Burge, and N. Woolf, “Final laboratory results of visible nulling with dielectric plates,” in Interferometry for Optical Astronomy II, W. Traub, Editor, Proc. SPIE 4838, 644-655, (2003). |
|
|
H. M. Martin, R. G. Allen, J. H. Burge, L. R. Dettmann, D. A. Ketelsen, S. M. Miller III, and J. M. Sasian , “Fabrication of mirrors for the Magellan Telescopes and the Large Binocular Telescope , in Large Ground-based Telescopes, J. Oschmann and L. Stepp, Editors, Proc. SPIE 4837, 609-618 (2003) |
|
|
C. F. Claver and J. H. Burge, “Active alignment of the 3-mirror LSST,” in Survey and other telescope Technologies and Discoveries, J. Tyson and S. Wolff, eds., Proc. SPIE 4836 (2003) |
|
|
E. M. Sabatke and J. H. Burge, “Basic principles in the optical design of imaging multiple aperature systems,” in International Optical Design Conference 2002, P. K. Manhart, J. M. Sasian, Editors, Proc. SPIE 4832, 236 (2003). |
C. Zhao and J. H. Burge, “Criteria for correction of all aberrations with quadratic field dependence,” in International Optical Design Conference 2002, P. K. Manhart, J. M. Sasian, Editors, Proc. SPIE 4832, 226 (2003). |
|
|
E. M. Sabatke and J. H. Burge, “ Optical design of imaging interferometer using flat membrane mirrors,” in Highly Innovative Space Telescope Concepts, H. A. MacEwen, ed., Proc. SPIE 4849 365-371 (2002). |
|
|
J. H. Burge, “Optical design issues for giant telescopes,” invited paper in International Optical Design Conference, (Optical Society of America, Washington DC, 2002) pp. 102-104. |
|
|
J. Burge, P. Koudelka, “Optical test alignment using computer generated holograms” in Optical Fabrication and Testing, (Optical Society of America, Washington DC, 2002) pp. 105-107. |
|
|
J. Burge, A.G. Poleshchuk, V. P. Korolkov, V. V. Cherkashin, “Methods for certification of CGH fabrication” in Diffractive Optics and Microoptics, (Optical Society of America, Washington DC, 2002). |
|
|
J. Burge and R. Angel, “A wide field telescope optimized for multiple object spectroscopy or adaptive optics imaging,” WFMOS Workshop, ASP Conference Series, 2002. |
|
|
S. Errico, B. L. Stamper, J. H. Burge, J. R.P Angel, T. Connors, B. Duffy, N. J. Woolf, “Stretched membrane with electrostatic curvature (SMEC) mirrors: tests of a new technology for large lightweight space telescopes,” in Highly Innovative Space Telescope Concepts, H. A. MacEwen, ed., Proc. SPIE 4849, (2002). |
|
|
M. T. Tuell, J. H. Burge,
B. Anderson, “Aspheric optics: smoothing the ripples with semiflexible
tools,” Opt. |
|
|
C. Zhao and J. Burge, “Criteria for correction of all
aberrations with quadratic field dependence,” in International Optical
Design Conference, (Optical Society of |
|
|
S. Errico, B. Stamper, J.
Burge, “Stretched membrane with electrostatic curvature (SMEC) mirrors:
demonstration of a new technology for large lightweight space telescopes,” in
International Optical Design Conference, (Optical Society of |
|
|
E. M. Sabatke, J. H. Burge, “Basic principle of
combining beams in imaging multiple aperture syustems,”
in International Optical Design Conference, (Optical Society of |
|
|
B. Stamper, J. Burge, “Index inhomogeneity effects ion
imaging systems,” in International
Optical Design Conference, (Optical Society of |
|
|
F. Pan, J. Burge, D. Anderson,
“Measuremet of aspherical
surfaces using test plate and computer generated hologram (CGH)” in Optical
Fabrication and Testing, (Optical Society of |
|
|
D. Baiocchi, J. Burge, B. Cuerden, and S. DeRigne “Initial operation of the University of Arizona NGST mirror system demonstrator,” in Optical Fabrication and Testing, (Optical Society of America, Washington DC, 2002) pp. 32-34. |
|
|
B. M. Martin, J. H. Burge, L. R. Dettmann, J. M. Hill, D. A. Ketelsen, S. M. Miller, and J. M. Sasian, “Optics for the Large Binocular Telescope” in Optical Fabrication and Testing, (Optical Society of America, Washington DC, 2002) pp. 35-37. |
|
|
Zhao, C. and J. H. Burge, “Criteria for correction of quadratic field dependent aberrations,” JOSA A 19, 2313-2321 (2002). |
|
|
Zhao, C. and J. H. Burge, “Comparison of exact pupil astigmatism conditions with Seidel approximation,” Appl. Opt. 41, 7284-7287 (2002). |
|
|
Zhao, C. and J. H. Burge, “Application of the pupil astigmatism criteria in optical design,” Appl. Opt. 41, 7288-7293 (2002). |
|
|
Zhao, C. and J. H. Burge, “Conditions for correction of linear and quadratic field-dependent aberrations in plane-symmetric optical systems,” JOSA A 19, 2467-2472 (2002). |
|
|
A.G. Poleshchuk, V.P. Korolkov, V.V. Cherkashin, S. Reichelt, J.H. Burge, “Methods for minimizing the errors in direct laser writing of diffractive optical elements,” Optoelectr., Instrum. and Data Process., No. 3, p. 3, 2002. |
|
|
C. Zhao and J. H. Burge, “Vibration-compensated interferometer for surface metrology,” Appl. Opt. 40, 6215-6222 (2001). |
|
J. H. Burge, B. Anderson, S. Benjamin, M. Cho, K. Smith, M. Valente, “Development of optimal grinding and polishing tools for aspheric surfaces,” in Optical Manufacturing and Testing IV, H. P. Stahl, ed., Proc. SPIE 4451, 153-164 (2001). |
|
|
J. Burge, S. DeRigne, R. Angel, B. Cuerden, S. Clapp, G. Rivlis, P. Woida, P. Gohman, S. Bell, R. Kingston, “NGST Mirror System Demonstrator from the University of Arizona,” in Optical Manufacturing and Testing IV, H. P. Stahl, ed., Proc. SPIE 4451, pp. 27-38 (2001). |
|
|
|
B. Stamper, R. Angel, J. Burge, T. Connors, B. Duffy, N. Woolf, “Stretched Membrane with Electrostatic Curvature (SMEC) Mirrors for Extremely Large Space Telescopes,”in Optical Manufacturing and Testing IV, H. P. Stahl, ed., Proc. SPIE 4451, 105-113 (2001). |
|
|
A. Poleshchuk, V. Korolkov,V. Cherkashin, S. Reichelt, J. Burge, “Polar coordinate laser writing systems: error analysis of fabricated DOES”, in Lithographic and Micromachining Techniques for Optical Component Fabrication, E. Kley and H. Herzig, eds., Proc. SPIE 4440 161-172 (2001). |
|
|
M. Valente, J. Burge, R. DiCenso, A. Abusafieh, D. Federico, “Suitability of igneous rock for precision tooling,” in Optical Manufacturing and Testing IV, H. P. Stahl, ed., Proc. SPIE 4451, 174-180 (2001). |
|
|
D. Baiocchi, J. H. Burge, B. Cuerden, “ Demonstration of a 0.5-m ultralightweight mirror for use at geosynchronous orbit,” in Optical Manufacturing and Testing IV, H. P. Stahl, ed., Proc. SPIE 4451, 86-95 (2001). |
|
|
D. |
|
|
J. R. P Angel, C. F. Claver, R. Sarlot, H.M.Martin, J.H.Burge, J.A. Tyson, D. Wittman, K. Cook, “LSST optical design,” Bulletin of the American Astronomical Society, Vol. 33, p.1462 (2001). |
|
J. H. Burge, D. Baiocchi, B. Cuerden, “Ultralightweight active mirror technology at the University of Arizona,” in Optomechanical Engineering, M. Kahan, Ed., Proc. SPIE 4198 (2000). |
|
|
J. H. Burge, E. Sabatke, J. R. P. Angel, and N. J. Woolf, “Optical design of giant telescopes for space,” in Novel Optical Systems Design and Optimization III, J. M. Sasian, Ed., Proc. SPIE 4092 (2000). |
|
|
|
J. H. Burge, B. Cuerden, J. R. P. Angel, “Active mirror technology for large space telescopes,” in UV, Optical, and IR Space Telescopes and Instruments, Proc. SPIE 4013 (2000). |
|
|
D. Baiocchi and J. H. Burge, “Radius of curvature metrology for segmented optics,” in Current Developments in Lens Design and Optical Systems Engineering, R. E. Fischer, Ed., Proc. SPIE 4093, 58-67 (2000). |
|
|
B. Stamper, R. Angel, J. Burge, and N. Woolf, “Flat membrane mirrors for space telescopes,” in Imaging Technology and Telescopes, J. Breckenrideg, Ed., Proc. SPIE 4091 (2000). |
|
|
R. Angel, J. Burge, K. Hege, M. Kenworthy and N. Woolf , “Stretched membrane with electrostatic curvature (SMEC): A new technology for ultra-lightweight space telescopes,” in UV, Optical, and IR Space Telescopes and Instruments, J. Breckinridge and P. Jakobsen, Eds., Proc. SPIE 4013, (2000). |
|
|
B. E. Catanzaro, D. Keane, S. J. Connell, D, Baiocchi, J. H. Burge, A. K. Maji, M. K. Powers, “UltraLITE glass/composite hybrid mirror” in UV, Optical, and IR Space Telescopes and Instruments, J. Breckinridge and P. Jakobsen, Eds., Proc. SPIE 4013 (2000). |
|
|
R. M Morgan and J. H. Burge, “Nulling interferometric beam combiner using dielectric plates: experimental results in the visible broadband,”in Interferometry in Optical Astronomy, Proc. SPIE 4005, (2000). |
|
|
D. W. McCarthy, E. Sabatke, R. Sarlot, P. Hinz, and J. Burge, “Cryogenic beam combiner for very low background, 2-20 micron interferometry on the 22.8 m Large Binocular Telescope,” in Interferometry in Optical Astronomy, Proc. SPIE 4006, (2000). |
|
|
R. A. Keski-Kuha, W. Smith, P. Bely, R. Burg, J. H. Burge, C. Burrows, P. Davila, J. M. Geary, J. Hagopian, D. N. Jacobson, A. E. Lowman, S. A. Macenka, J. D. Mangus, C. M. Perrygo, D. C Redding, B. N. Saif, J. C. Wyant, “NGST OTA metrology instrumentationand conceptual approaches,”in UV, Optical, and IR Space Telescopes and Instruments, J. Breckinridge and P. Jakobsen, Eds., Proc. SPIE 4013 (2000). |
|
|
H. M. Martin, J. H. Burge, C. Del Vecchio, L. R. Dettmann, S. M. Miller, B. K. Smith, F. P. Wildi, “Optical fabrication of the MMT adaptive secondary mirror,” in Adaptive Optical Systems Technology, Proc. SPIE 4007 (2000). |
|
|
A. G. Poleshchuk, J. H. Burge, E. G. Churin, “Design and application of CGHs for simultaneous generating specified wavefronts,”in Diffractive Optics, European Optical Soc. Tech. Digest 22 (1999). |
|
|
J. H. Burge, T. Peper, and S. F. Jacobs, “Thermal expansion of borosilicate glass, Zerodur, Zerodur M, and unceramized Zerodure at low temperatures,” Applied Optics 38, 7161-7162 (1999). |
|
|
J. H. Burge, “Simulation and optimization for a computer-controlled large-tool polisher,” OSA Trends in Optics and Photonics Vol. 24, Fabrication and Testing of Aspheres, J. S. Taylor, M. Piscotty, and A. Lindquist eds.(Optical Society of America, Washington, DC 1999) pp. 165-168. |
|
|
J. H. Burge, L. R. Dettmann, and S. C. West, “Null correctors for 6.5-m f/1.25 paraboloidal mirrors,” OSA Trends in Optics and Photonics Vol. 24, Fabrication and Testing of Aspheres, J. S. Taylor, M. Piscotty, and A. Lindquist eds.(Optical Society of America, Washington, DC 1999) pp. 182-186. |
|
|
H. M. Martin, R. G. Allen, J. H. Burge, L. R. Dettmann, D. A. Ketelsen, S. M. Miller, and S. C. West, “Fabrication of 6.5-m f/1.25 mirrors for the MMT and Magellan Telescopes,” OSA Trends in Optics and Photonics Vol. 24, Fabrication and Testing of Aspheres, J. S. Taylor, M. Piscotty, and A. Lindquist eds.(Optical Society of America, Washington, DC 1999) pp. 187-192. |
|
|
J. H. Burge, M. J. Fehniger, and G. C. Cole, “Demonstration of accuracy and flexibility of using CGH test plates for measuring aspheric surfaces,” OSA Trends in Optics and Photonics Vol. 24, Fabrication and Testing of Aspheres, J. S. Taylor, M. Piscotty, and A. Lindquist eds.(Optical Society of America, Washington, DC 1999) pp. 199-209. |
|
|
B. K. Smith, J. H. Burge, and H. M. Martin, “Fabrication of large convex mirrors,” OSA Trends in Optics and Photonics Vol. 24, Fabrication and Testing of Aspheres, J. S. Taylor, M. Piscotty, and A. Lindquist eds.(Optical Society of America, Washington, DC 1999) pp. 169-175. |
|
|
H. M. Martin, R. G. Allen, J. H. Burge, L. R. Dettmann, D. A. Ketelsen, W. C. Kittrell and S. M. Miller, “Polishing of a 6.5 m f/1.25 mirror for the first Magellan telescope”, in Optical Fabrication and Testing, R. Geyl, ed., Proc SPIE 3739, p. 47 (1999). |
|
|
R. Morgan and J. Burge, “Initial Results of a white light nulled fringe,” in Optical and IR Interferometry from Ground and Space, S.C. Unwin and R.V. Stachnik Eds., ASP Conference Series (1999). |
|
|
R. Angel, J. Burge and N. Woolf, “Flat mirrors optics to study extra-solar terrestrial planets from space,” in Optical and IR Interferometry from Ground and Space, S.C. Unwin and R.V. Stachnik Eds., ASP Conference Series (1999). |
|
|
J. H. Burge and J. R. P. Angel, “Testing NGST segment technology in a 3.5 m space telescope,” in Ultraviolet-Optical Space Astronomy beyond HST, J. A Morse, M. Shull, A. Kinney, Eds., ASP Conference Series (1999). |
|
|
J. H. Burge, J. R. P. Angel, B. Cuerdon, and N. J. Woolf, “Glass membrane mirrors beyond NGST,” Proceedings from NASA’s Ultra Lightweight Space Optics Challenge Workshop, Napa, CA, March 24-25, (1999). |
|
|
J. R. P. Angel, J. H. Burge and N. J. Woolf, “Extremely large space telescopes and interferometers made with flat primary mirrors,” ibid.1999. |
|
|
J. H. Burge and B. Cuerden, “Design considerations for active membrane mirrors,” ibid. 1999 |
|
|
W. F. Hoffmann, P. M. Woida, J. H. Burge and B. Catanzaro, “Active Composite Membrane Mirrors,” ibid. 1999. |
|
|
J. H. Burge, “Ultra-lightweight, actively controlled mirrors for space,” in International Commision for Optics XVII, (1999). |
|
|
J. H. Burge, T. Peper, and S. F. Jacobs, “Thermal expansion of borosilicate glass, Zerodur, Zerodur M, and unceramized Zerodure at low temperatures,” in OSA Optics and Photonics News, Vol 10, No. 5 (1999). |
|
|
J. M. Sasian, S. A. Lerner, J. H. Burge, “Certification of a null corrector via a diamond turned asphere: design and implementation,” in International Commision for Optics XVII , (1999). |
|
|
J. H. Burge, “Efficient testing of off-axis aspheres with test plates and computer-generated holograms,” in Optical Manufacturing and Testing III, H. Stahl, Ed. Proc. SPIE 3782, 349-357 (1999). |
|
J. H. Burge, B. Cuerden, S. Miller, R. C. Crawford, R. W. Wortley, D. G. Sandler, “Manufacture of a 2-m mirror with a membrane facesheet and active rigid support” in Optical Manufacturing and Testing III, H. Stahl, Ed. Proc. SPIE 3782, 123-133 (1999). |
|
|
Y. Chang and J. H. Burge, “Error analysis for CGH testing,” in Optical Manufacturing and Testing III, H. Stahl, Ed. Proc. SPIE 3782, 358-366 (1999). |
|
|
|
C. Zhao and J. H. Burge, “Vibration compensated interferometer for measuring cryogenic mirrors,” in Optical Manufacturing and Testing III, H. Stahl, Ed. Proc. SPIE 3782, 399-406 (1999). |
|
|
R. Sarlot, J. H. Burge, D. W. McCarthey Jr., J. Ge, “Optical design of ARIES: the new near IR science instrument the the adaptive f/15 Multiple Mirror Telescope,” in Current Developments in Optical Design and Optical Engineering VIII, R. Fischer, Ed., Proc. SPIE 3779, (1999). |
|
|
José M. Sasián, Scott A. Lerner, James H. Burge, Hubert M. Martin, “Design, tolerancing, and certification of a null corrector to test 8.4-m mirrors,” Proc. SPIE 3739, 444-448 (1999). |
|
|
José M. Sasian, Scott A. Lerner, James H. Burge, “Certification of a null corrector via a diamond-turned asphere: design and implementation,” Proc. SPIE 3749, 284-285 (1999). |
|
|
R. Sarlot, C. Bresloff, J. Burge, B. Fitz-Patrick, P. McGuire, B. Stamper, C. Zhao, “Progress report on the optical system for closed-loop testing of the MMT adaptive secondary mirror,” in Current Developments in Optical Design and Optical Engineering VIII, R.E. Fischer and W. J. Smith, Eds., Proc. SPIE 3779 (1999) |
|
J. H. Burge, “Designs of null test optics for an 8.4-m, f/1.1 paraboloidal mirror,” in Optical Fabrication and Testing, OSA Tech. Dig. 12 (1998). |
|
|
|
S. Miller, J. Burge, B. Cuerden, “A fabrication plan for ultra light mirrors for NGST,” in Optical Fabrication and Testing, OSA Tech. Dig. 12 (1998). |
|
|
R. J. Sarlot and J. H. Burge, “Optical system for closed-loop testing of adaptive optic convex mirror,” in Novel Optical Systems and Large-Aperture Imaging, K. Bell, et al. Eds. Proc. SPIE 3430, 126-135 (1998). |
|
|
R. Angel and J. H. Burge, “Verifying mirror technology for NGST with a space-qualified, cryogenic 3.5 m mirror,” in ESA Conf. Proc. Workshop on the Next Generation Space Telescope: science drivers and technical challenges, Liege, Belgium June 15-18 1998. |
|
J. H. Burge, “Simulation and optimization for a computer-controlled large-tool polisher,” in Optical Fabrication and Testing, OSA Tech. Dig. 12 (1998). |
|
|
|
B. K. Smith and J. H. Burge, “Laps and metrology for large fast aspheric convex mirrors,” in Optical Fabrication and Testing, OSA Tech. Dig. 12 (1998). |
|
J. H. Burge, “Fabrication of large circular diffractive optics,” in Diffractive Optics and Micro-Optics, OSA Tech. Dig. 10 (1998). |
|
|
|
J. H. Burge, “Design of null test optics for an 8.4-m, f/1.1 paraboloidal mirror,” in International Optical Design Conference, OSA Tech. Dig. 12 (1998). |
|
J. H. Burge, J. R. P. Angel, B. Cuerden, H. M. Martin, S. M. Miller, D. G. Sandler, “Lightweight mirror technology using a thin facesheet with active rigid support,” in Space Telescopes and Instruments V, P. Bely, J. Breckinridge, Eds., Proc SPIE 3356, 690-701 (1998). |
|
|
|
D. W. McCarthy, Jr., J. H. Burge, J. R. Angel, J. Ge, C. Fitzpatrick, “ARIES: Arizona infrared imager and spectrograph,” in Infrared Astronomical Instrumentation,” A. M. Fowler, Ed., Proc. SPIE 3354, 750-754 (1998). |
|
|
J. R. P. Angel and J. H. Burge, “Towards NGST,” in Space Telescopes and Instruments V, P. Bely, J. Breckinridge, Eds., Proc SPIE 3356, 185-186 (1998). |
|
|
H. M. Martin, J. H. Burge, R. G. Allen, W. B. Davison, S. T. DeRigne, L. R. Dettmann, D. A Ketelsen, W. C. Kittrell,. S. M. Miller, S. C. West, “Fabrication and measured quality of the MMT primary mirror,” in Advanced Technology Optical/IR Telescopes VI, L. M. Stepp Ed., Proc. SPIE 3352, 194-204 (1998). |
|
|
N.J. Woolf , J.R.P. Angel, C.A. Beichman, J. Burge, M. Shao, D. Tenerelli, “Planet Discoverer Interferometer I: PDI, a potential precursor to Terrestrial Planet Finder,” in Astronomical Interferometry, R. Reasonberg, and J. Breckinridge Eds., Proc. SPIE 3350, 683-689 (1998) |
|
|
J. Ge, R. Angel, J. Burge, D. McCarthy, D. Sandler, C. Shelton, “Adaptive optics spectroscopy: preliminary theortical results,” in Adaptive Optics and Applications, Proc. SPIE 3126, 343-354 (1997) |
|
|
G. C. Cole, J. H. Burge, L. R. Dettmann, “Vibration stabilization of a phase shifting interferometer for large optics,” in Optical Manufacturing and Testing II, H Stahl Ed., Proc. SPIE 3134, 438-446 (1997). |
|
|
J. H. Burge, M. J. Fehniger, and G. C. Cole, “Demonstration of accuracy and flexibility of using CGH test plates for measuring aspheric surfaces,” in Optical Manufacturing and Testing II, H Stahl Ed., Proc. SPIE 3134, 379-389 (1997). |
|
|
B. K. Smith, J. H. Burge, H. M. Martin, “Fabrication of large secondary mirrors for astronomical telescopes” in Optical Manufacturing and Testing II, H Stahl Ed., Proc. SPIE 3134, 51-61 (1997). |
|
|
V. Cherkashin, J. H. Burge, et al., “Processing parameter optimization for thermochemical writing of DOEs on chromium films,” in Diffractive and Holographic Device Technologies and Applications IV, I. Cindrich and S. H. Lee Eds., Proc. SPIE 3010, 168-179 (1997). |
|
|
J. H. Burge, “Measurement of large convex aspheres,” in Optical Telescopes of Today and Tomorrow, A. Ardeberg Ed., Proc. SPIE 2871, 362-373 (1996). |
|
|
R. Angel, J. Burge, and N. Woolf, “Detection and spectroscopy of exo-planets like earth,” in Optical Telescopes of Today and Tomorrow, A. Ardeberg Ed., Proc. SPIE 2871, 516-519 (1996). |
|
|
H. M. Martin, J. H. Burge, D. A. Ketelsen, and S. C. West, “Fabrication of the 6.5-m primary mirror for the Multiple Mirror Telescope Conversion,” in Optical Telescopes of Today and Tomorrow, A. Ardeberg Ed., Proc. SPIE 2871, 399-404 (1996). |
|
|
J. H. Burge, “Measurement of large convex aspheres,” in Optical Fabrication and Testing, OSA Tech. Dig. 7, 179-182 (1996). |
|
|
B. K. Smith, J. H. Burge, and H. M. Martin, “Fabrication of the 1.2-m secondary mirror for the Sloan Digital Sky Survey,” in Optical Fabrication and Testing, OSA Tech. Dig. 7, 176-178 (1996). |
|
|
J. H. Burge, D. Murgiuc, S. C. West, “Null correctors for 6.5-m ƒ/1.25 paraboloidal mirrors,” in Opt. Fab. and Test Tech. Dig. 7, 164-167 (1996). |
|
|
N. J. Woolf, J. R. P. Angel, and J. H. Burge, “Planet
Finder Options III: Focal Plane Instrumentation and Adjustment,” in Proceedings of the Workshop on Infrared
Space Interferometry, |
|
|
J. H. Burge, “Fizeau interferometry for large convex surfaces,” in Optical Manufacturing and Testing, V. J. Doherty and H. P. Stahl, Editors, Proc. SPIE 2536, 127-138 (1995). |
|
|
J. H. Burge, “Applications of computer-generated holograms for interferometric measurement of large aspheric optics” in Optical Fabrication and Testing, Proc. SPIE 2576, 258-269 (1995). |
|
|
D. S. Anderson and J. H. Burge, “Swing arm profilometry of aspherics,” in Optical Manufacturing and Testing, V. J. Doherty and H. P. Stahl, Editors, Proc. SPIE 2536, 169-179 (1995). |
|
|
J. H. Burge and D. S. Anderson, “Full-aperture interferometric test of convex secondary mirrors using holographic test plates,” in Advanced Technology Optical Telescopes V, L. M. Stepp, Editor, Proc. SPIE 2199, 181-192 (1994). |
|
|
J. H. Burge, D. S. Anderson, T. D. Milster, and C. L. Vernold, “Measurement of a convex secondary mirror using a holographic test plate,” in Advanced Technology Optical Telescopes V, L. M. Stepp, Editor, Proc. SPIE 2199, 193-198 (1994). |
|
|
J. H. Burge, D. S. Anderson, D. A. Ketelsen, and S. C. West, “Null test optics for the MMT and Magellan 6.5-m ƒ/1.25 primary mirrors,” in Advanced Technology Optical Telescopes V, L. M. Stepp, Editor, Proc. SPIE 2199, 658-669 (1994). |
|
|
J. H. Burge, “New uses of computer-generated holograms for measuring astronomical optics,” in Diffractive Optics, OSA Tech. Dig. 11, 34-37 (1994). |
|
|
J. H. Burge and D. S. Anderson, “Interferometric measurement of convex aspheres using holographic test plates,” in Optical Fabrication and Testing, OSA Tech. Dig. 13, 273-276 (1994). |
|
|
D. S. Anderson and J. H. Burge, “Infrared interferometric wire test of aspherics,” in Optical Fabrication and Testing, OSA Tech. Dig. 13, 277-284 (1994). |
|
|
D. Anderson, H. Martin, J. Burge, and S. West, “Rapid fabrication strategies for primary and secondary mirrors at Steward Observatory Mirror Lab,” in Advanced Technology Optical Telescopes V, L. M. Stepp, Editor, Proc. SPIE 2199, 199-210 (1994). |
|
|
J. H.
Burge, Advanced Techniques for Measuring Primary
Mirrors for Astronomical Telescopes, Ph. D. Dissertation, Optical
Sciences, |
|
|
J. H. Burge, “Certification of null correctors for primary mirrors,” in Advanced Optical Manufacturing and Testing IV, J. Doherty, Editor, Proc. SPIE 1994, 248-259 (1993). |
|
|
J. H. Burge, “A null test for null correctors: error analysis,” in Quality and Reliability for Optical Systems, J. W. Bilbro and R. E. Parks, Editors., Proc. SPIE 1993, 86-97 (1993). |
|
|
J. H. Burge and D. S. Anderson, “A full-aperture optical test for large convex aspheric mirrors,” Proc. Amer. Soc. for Precision Engineering 8, 29-32 (1993). |
|
|
D. Anderson, J. Burge, D. Ketelsen, B. Martin, S. West, G. Poczulp, J. Richardson, and W. Wong, “Fabrication and testing of the 3.5-m, ƒ/1.75 WIYN primary mirror,” in Advanced Optical Manufacturing and Testing IV, J. Doherty, Editor, Proc. SPIE 1994, 193-207 (1993). |
|
|
J. H. Burge, “Interferometric metrology for a 6.5-meter ƒ/1.25 paraboloidal mirror,” Opt. Fab. and Test. W. Tech. Dig. 24, 172-175 (1992). |
|
|
J. H. Burge, “Design and analysis of null test optics for large aspheric mirrors,” in Progress in Telescope and Instrumentation Technologies, M.-H. Ulrich, Editor, Proc. ESO 42, 273-276 (1992). |
|
|
S. C. West, J. H. Burge, R. S. Young, D. S. Anderson, C. Murguic, D. A. Ketelsen, and H. M. Martin, “Optical metrology of two large highly aspheric telescope mirrors,” Applied Optics 31, 7191-7197 (1992). |
|
|
H. M. Martin, J. H. Burge, and S. C. West, “Environmental effects in the testing of large astronomical mirrors,” Precision Interferometric Metrology, Proc. ASPE 5, 72-75 (1992). |
|
|
H. M. Martin, D. S. Anderson, J. H. Burge, and S. C. West, “Stressed-lap polishing of large, highly aspheric primary mirrors,” Opt. Fab. and Test. W. Tech. Dig. 24, 168-171 (1992). |
|
|
H. M. Martin, J. R. P. Angel, J. H. Burge, W. B. Davison, S. T. DeRigne, S. C. West, and R. S. Young, “Facilities and techniques for finishing 8-m mirrors at the Steward Observatory Mirror Lab,” in Progress in Telescope and Instrumentation Technologies, M.-H. Ulrich, Editor, Proc. ESO 42, 261-264 (1992). |
|
|
H. M. Martin, D. S. Anderson, J. R. P. Angel, J. H. Burge, W. B. Davison, S. T. DeRigne, B. B. Hille, D. A. Ketelsen, W. C. Kittrell, R. McMillan, R. H. Nagel, T. J. Trebisky, S. C. West, and R. S. Young, “Stressed-lap polishing of 1.8-m ƒ/1 and 3.5-m ƒ/1.5 primary mirrors,” in Progress in Telescope and Instrumentation Technologies, M.-H. Ulrich, Editor, Proc. ESO 42, 169-172 (1992). |
|
|
J. H. Burge, “Computer simulation and optimization of stressed-lap polishing,” OSA Ann. Mtg. Tech. Dig. 17, 107 (1991). |
|
|
J. H. Burge, “Null test optics for large aspheric mirrors,” OSA Ann. Mtg. Tech. Dig. 17, 124-125 (1991). |
|
|
D. S. Anderson, J. R. P. Angel, J. H. Burge, W. B. Davison, S. T. DeRigne, B. B. Hille, D. A. Ketelsen, W. C. Kittrell, H. M. Martin, R. H. Nagel, T. J. Trebisky, S. C. West, and R. S. Young, “Stressed-lap polishing of 3.5-m ƒ/1.5 and 1.8-m ƒ/1.0 mirrors,” in Advanced Optical Manufacturing and Testing II, V. J. Doherty, Editor, Proc. SPIE 1531, 260-269 (1991). |
|
|
L. A. Stockum and J. H. Burge, “Electromechanical design for precision pointing and tracking systems,” in Electromechanical System Interaction with Optical Design, S Gowrinathan, Editor, Proc. SPIE 779, 66-74 (1987). |